RCI Transmission Skid Plate with Crossmembers – 2021+ Bronco 2.7L & 2024+ Ranger | 21-BRONCO-24-RGR-TRANS-XMBR

Protect the transmission and exhaust on your Ford Bronco or Ford Ranger with the RCI Off Road Transmission Skid Plate with Crossmembers, part #21-BRONCO-24-RGR-TRANS-XMBR.

Designed for 2021+ Ford Bronco 2.7L EcoBoost and compatible 2024+ Ford Ranger applications, this heavy-duty transmission skid provides substantially more protection than the factory underbody armor while maintaining a smooth, flat surface designed to slide over rocks and other trail obstacles.

Choose from 3/16-inch steel or lightweight 1/4-inch aluminum construction depending on your vehicle, terrain and desired strength-to-weight ratio.

Vehicle Fitment

Ford Bronco

• 2021+
• 2.7L EcoBoost V6
• Models with frame crossmembers

Ford Ranger

• 2024+
• Compatible models with frame crossmembers

IMPORTANT: FOR MODELS WITH FRAME CROSSMEMBERS ONLY.

Verify your vehicle's underbody configuration before ordering.

Features

• Protects the transmission and exhaust
• Fits compatible 2021+ Ford Bronco 2.7L applications
• Fits compatible 2024+ Ford Ranger applications
• For models with frame crossmembers only
• Choice of 3/16" steel or 1/4" aluminum
• Significantly more coverage than factory skid plates
• Smooth, flat bottom helps slide over trail obstacles
• Direct bolt-on installation
• Attaches to factory mounting points
• No drilling required
• Compatible with OEM front and transfer case skid plates
• Integrates with compatible RCI engine and transfer case skid plates
• Installation hardware included
• Black powder-coated finish available
• Made in the USA
• RCI part number 21-BRONCO-24-RGR-TRANS-XMBR

Transmission & Exhaust Protection

The transmission and exhaust system are vulnerable to rocks, ledges and other obstacles encountered while driving off-road.

RCI designed this skid plate to provide a substantial protective barrier underneath these critical components while maintaining a smooth, flat surface that helps the vehicle slide over obstacles rather than becoming hung up on exposed drivetrain components.

It's an excellent upgrade for vehicles used for:

• Off-roading
• Rock crawling
• Overlanding
• Trail driving
• Camping
• Hunting
• Backcountry travel
• General underbody protection

Steel or Aluminum

RCI offers two material options depending on how you use your Bronco or Ranger.

3/16" Steel

The steel version provides maximum impact resistance for demanding off-road use.

• Heavy-duty 3/16" steel construction
• Excellent impact protection
• Significantly stronger than factory skid plates
• Heavy-duty black powder-coated finish standard
• Approximate weight: 35 lbs.

Steel is an excellent choice for rock crawling and vehicles that regularly encounter demanding terrain.

1/4" Aluminum

The aluminum version provides substantial protection with considerably less added weight.

• 1/4" aluminum construction
• Excellent corrosion resistance
• Cannot rust
• Excellent strength-to-weight ratio
• Approximately 2/3 the strength of the steel version
• Approximate weight: 18 lbs.

RCI states that the aluminum version weighs approximately 50% as much as the steel version.

Compatible with Factory Skid Plates

One particularly useful feature of this RCI transmission skid is its compatibility with the OEM front and transfer case skid plates.

That means you don't necessarily need to replace your entire factory skid plate system at once.

The transmission skid can be installed as a standalone upgrade or combined with compatible RCI skid plates as you build a more comprehensive underbody protection system.

Integrates with RCI Skid Plates

For owners looking for more complete underbody protection, the transmission skid is designed to integrate with compatible:

• RCI Engine Skid Plate
• RCI Transfer Case Skid Plate
• Additional RCI underbody protection

This allows you to build your skid plate system in stages rather than purchasing the entire system at once.

Direct Bolt-On Installation

RCI designed the transmission skid for straightforward installation using factory attachment points.

No drilling is required.

Installation can be completed using basic hand tools, and the required hardware kit is included.

Important Crossmember Requirement

THIS VERSION IS FOR VEHICLES WITH FRAME CROSSMEMBERS ONLY.

RCI specifically identifies this requirement for part #21-BRONCO-24-RGR-TRANS-XMBR.

Because Ford Bronco and Ranger underbody configurations can vary by model, engine and factory equipment, inspect or verify your vehicle's crossmember configuration before ordering.

Product Specifications

Manufacturer: RCI Off Road / RCI Metalworks
Part Number: 21-BRONCO-24-RGR-TRANS-XMBR
Product: Transmission Skid Plate with Crossmembers
Position: Transmission / Exhaust
Steel Material: 3/16" Steel
Aluminum Material: 1/4" Aluminum
Steel Weight: Approximately 35 lbs.
Aluminum Weight: Approximately 18 lbs.
Installation: Direct Bolt-On
Drilling Required: No
Hardware: Included
OEM Front Skid Compatible: Yes
OEM Transfer Case Skid Compatible: Yes
Country of Manufacture: USA

Frequently Asked Questions

What vehicles does RCI 21-BRONCO-24-RGR-TRANS-XMBR fit?
RCI designed this transmission skid for compatible 2021+ Ford Bronco 2.7L EcoBoost and 2024+ Ford Ranger applications equipped with frame crossmembers.

Does this fit the 2.7L EcoBoost Ford Bronco?
Yes. RCI specifically identifies the product for 2021+ Bronco 2.7L applications with the required frame crossmember configuration.

Will it fit a 2.3L Bronco?
Do not assume compatibility based solely on the chassis. This particular RCI product is specifically identified for the 2.7L Bronco. Verify the appropriate RCI skid for a 2.3L application before ordering.

Does it fit the Ford Ranger?
Yes. RCI identifies this skid for compatible 2024+ Ford Ranger applications with frame crossmembers.

What does the skid plate protect?
RCI designed it to provide protection for the transmission and exhaust.

Should I choose steel or aluminum?
Choose 3/16" steel when maximum impact resistance is the priority. Choose 1/4" aluminum when you want substantial protection with significantly less added weight.

How much does the steel skid weigh?
Approximately 35 lbs.

How much does the aluminum skid weigh?
Approximately 18 lbs.

Will it work with the factory skid plates?
Yes. RCI states that it is compatible with the OEM front and transfer case skid plates.

Does installation require drilling?
No. It attaches to existing factory mounting points and requires no drilling.

Is installation hardware included?
Yes. RCI includes the required hardware kit.

Is the RCI transmission skid made in the USA?
Yes. RCI manufactures this skid plate in the USA.