RCI Rear Differential Skid Plate – 2021+ Ford Bronco | RCI-BRONCO-DIFF

Protect the low-hanging rear differential on your 2021+ Ford Bronco with the RCI Off Road Rear Differential Skid Plate, part #RCI-BRONCO-DIFF.

Designed specifically for the 6th-generation Ford Bronco, this heavy-duty differential skid is CNC laser cut and brake formed from 3/16-inch steel to protect the rear differential from rocks, ledges and other on- and off-road hazards.

The skid clamps directly to the Bronco's axle housing for an easy no-drill installation and hugs the differential tightly to provide substantial protection with minimal loss of ground clearance.

Important Fitment Notes

• Fits 2021+ Ford Bronco

• Designed for the 6th-generation Bronco

• DOES NOT FIT FORD BRONCO RAPTOR

• Clamps directly to the axle housing

• No drilling required

Vehicle Fitment

Ford Bronco

• 2021+

• Non-Raptor models

Ford Bronco Raptor

• NOT COMPATIBLE

RCI specifically excludes the Bronco Raptor from RCI-BRONCO-DIFF fitment.

Features

• Protects the Bronco's low-hanging rear differential

• Heavy-duty 3/16" steel construction

• CNC laser cut for precise fit

• Brake formed for strength and proper fitment

• Clamps directly to the axle housing

• No drilling required

• Hugs the differential within approximately 1/4"

• Minimal loss of ground clearance

• Drain holes allow water, dirt and debris to escape

• Maintains full access to the differential drain plug

• Durable black powder-coated finish

• Revised clamping mechanism

• Taller rear flange for additional protection

• Fully fixtured and robot-welded construction

• Installation hardware included

• Installation instructions included

• Installs in minutes

• Made in the USA

• RCI part number RCI-BRONCO-DIFF

Protect Your Bronco's Rear Differential

The rear differential is one of the lowest drivetrain components underneath the Ford Bronco and is particularly vulnerable when traveling over rocks, ledges and uneven terrain.

A direct impact to the differential housing can potentially result in expensive drivetrain damage or leave your Bronco disabled on the trail.

The RCI Rear Differential Skid Plate creates a heavy-duty 3/16-inch steel barrier around the lower portion of the differential to help protect it from direct contact with trail obstacles.

It's an excellent upgrade for Broncos used for:

• Off-roading

• Rock crawling

• Overlanding

• Trail driving

• Camping

• Hunting and backcountry travel

• Technical terrain

• General underbody protection

Minimal Loss of Ground Clearance

Adding underbody protection shouldn't unnecessarily reduce your Bronco's ground clearance.

RCI designed the RCI-BRONCO-DIFF to hug the differential housing within approximately 1/4 inch, keeping the skid tucked tightly against the axle assembly.

This provides substantial protection while minimizing the amount of ground clearance sacrificed by installing a rear differential skid plate.

Heavy-Duty 3/16" Steel Construction

RCI manufactures the Bronco Rear Differential Skid Plate from 3/16-inch steel for excellent strength and impact resistance.

Unlike some RCI skid plates that are available in both steel and aluminum, RCI-BRONCO-DIFF is specifically constructed from 3/16" steel.

The skid is finished in durable black powder coat for corrosion resistance and a clean appearance underneath the vehicle.

Easy No-Drill Installation

The RCI rear differential skid plate clamps directly to the Bronco's axle housing.

NO DRILLING REQUIRED.

The clamping design allows the skid to be securely mounted without drilling or permanently modifying the axle housing.

All required installation hardware and instructions are included.

Drainage & Differential Service Access

RCI incorporates strategically positioned drain holes into the skid plate.

These openings allow:

• Water to drain

• Mud and dirt to escape

• Debris to be washed from the skid

• Full access to the factory differential drain plug

This allows routine differential fluid service without requiring removal of the skid plate.

Updated RCI Design

RCI updated the RCI-BRONCO-DIFF design in 2022 with several improvements.

The updated design features:

• Taller rear skid plate flange

• Revised axle clamping mechanism

• Fully fixtured construction

• Robot-welded assembly

These revisions provide improved consistency, strength and protection compared with the earlier design.

Build a Complete RCI Bronco Skid Plate System

The rear differential skid is an excellent stand-alone upgrade, but it can also complement other RCI underbody protection for the 2021+ Ford Bronco.

Depending on your Bronco's engine and configuration, RCI offers additional protection for areas such as:

• Engine

• Transmission

• Transfer case

• Fuel tank

• Lower control arms

• Rear differential

This allows you to build your Bronco's underbody protection in stages or create a more comprehensive armor package for serious off-road use.

Bronco Raptor Compatibility

DOES NOT FIT FORD BRONCO RAPTOR.

RCI specifically excludes the Bronco Raptor from RCI-BRONCO-DIFF fitment.

Do not assume compatibility based solely on the Bronco nameplate. Bronco Raptor models use different suspension, axle and underbody components.

Product Specifications

Manufacturer: RCI Off Road / RCI Metalworks
Part Number: RCI-BRONCO-DIFF
Product: Rear Differential Skid Plate
Vehicle: Ford Bronco
Model Years: 2021+
Position: Rear Differential
Material: 3/16" Steel
Construction: CNC Laser Cut & Brake Formed
Finish: Black Powder Coat
Installation: Clamp-On
Drilling Required: No
Differential Clearance: Approximately 1/4"
Differential Drain Plug Access: Yes
Hardware: Included
Bronco Raptor Compatible: No
Country of Manufacture: USA

Frequently Asked Questions

What vehicles does RCI-BRONCO-DIFF fit?
RCI designed RCI-BRONCO-DIFF for 2021+ 6th-generation Ford Bronco applications, excluding the Bronco Raptor.

Does the RCI rear differential skid fit the Bronco Raptor?
No. RCI specifically states that RCI-BRONCO-DIFF does not fit the Ford Bronco Raptor.

What does the RCI Bronco differential skid protect?
It protects the low-hanging rear differential from rocks, ledges and other on- and off-road obstacles.

What is the skid plate made from?
RCI manufactures the skid from heavy-duty 3/16-inch steel.

Is an aluminum version available?
RCI specifies this particular Bronco differential skid as 3/16-inch steel construction.

How much ground clearance will I lose?
RCI designed the skid to hug the differential within approximately 1/4 inch, minimizing the loss of ground clearance.

Does installation require drilling?
No. The skid plate clamps directly to the axle housing and does not require drilling.

Can I change the differential fluid without removing the skid plate?
Yes. RCI designed the skid to maintain full access to the differential drain plug.

Can mud and water become trapped inside the skid?
RCI incorporates drain holes into the design to allow water, dirt and debris to escape.

Is installation hardware included?
Yes. RCI includes the required hardware and installation instructions.

Is the RCI Bronco Rear Differential Skid Plate made in the USA?
Yes. RCI manufactures the RCI-BRONCO-DIFF in the USA.