Warning:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Orange Boxx Heavy-Duty Dead Pedal Footrest – 2007-2014 Toyota FJ Cruiser & 2003-2009 4Runner | FJ-FOOTREST
Upgrade your driving comfort with the Orange Boxx Fabrication Heavy-Duty Dead Pedal Footrest, part number FJ-FOOTREST. Designed for the Toyota FJ Cruiser and 4th Generation Toyota 4Runner, this rugged steel footrest provides a sturdy, comfortable place to position your left foot while driving.
Unlike lightweight plastic footrests, the Orange Boxx dead pedal features 14-gauge laser-cut carbon steel construction reinforced with 16-gauge steel tubing for added strength and rigidity.
Finished in textured matte black powder coat, it blends naturally with your Toyota's interior while providing a durable, non-slip surface for everyday driving, long highway trips, and off-road adventures.
Important: Fits automatic transmission vehicles only. Not compatible with manual transmissions.
Vehicle Fitment
Toyota FJ Cruiser
-
2007-2014
-
Automatic transmission only
Toyota 4Runner – 4th Generation
-
2003-2009
-
Automatic transmission only
Designed for vehicles with an unmodified and undamaged factory footrest mounting area.
Key Features
-
Heavy-duty replacement dead pedal / driver's footrest
-
14-gauge laser-cut carbon steel construction
-
Reinforced with 16-gauge steel tubing on the back
-
Textured matte black powder-coated finish
-
Non-slip stepping surface
-
Provides a stable resting position for the driver's left foot
-
Designed for comfort during extended driving
-
Durable alternative to the factory-style footrest
-
No drilling required
-
Mounting hardware included
-
Vehicle-specific design
-
Automatic transmissions only
-
Made in the USA
Heavy-Duty Steel Construction
The Orange Boxx FJ Cruiser Footrest is engineered for owners who want a more substantial alternative to a conventional plastic dead pedal.
Its main structure is fabricated from 14-gauge carbon steel, precision laser-cut for a consistent fit and appearance.
On the back, 16-gauge steel tubing reinforces the assembly, providing additional structural support.
This combination creates a rigid footrest intended to withstand repeated use during daily driving and off-road travel.
Improved Driver Comfort
A properly positioned dead pedal provides a dedicated resting location for your left foot when it isn't operating a clutch.
The Orange Boxx footrest gives drivers a stable surface for supporting their foot, especially during extended periods behind the wheel.
It's a practical upgrade for:
-
Daily commuting
-
Long highway drives
-
Road trips
-
Overlanding
-
Trail driving
-
Off-road adventures
Whether you're traveling across Texas or exploring remote backcountry trails, having a solid resting position for your left foot can make time behind the wheel more comfortable.
Non-Slip Footrest Surface
The Orange Boxx dead pedal incorporates a non-slip surface to help keep your shoe positioned securely.
This is particularly useful when driving with work boots, hiking shoes, or other footwear commonly worn during outdoor activities.
The textured surface provides a practical contact area while complementing the rugged interior styling of the FJ Cruiser and 4Runner.
Textured Matte Black Powder-Coated Finish
The footrest is finished in textured matte black powder coat, providing a durable exterior coating that complements the factory interior.
The finish helps protect the steel construction against ordinary wear and environmental exposure.
Its understated appearance works well in both stock and modified interiors.
No-Drill Installation
The Orange Boxx Footrest is designed to install without drilling.
Mounting hardware is included, eliminating the need to source separate installation fasteners.
The manufacturer designs its foot pedals around the factory mounting locations of an unmodified vehicle.
Fitment Note: Previous accidents, collisions, or modifications can affect the alignment of factory mounting studs. Verify the condition of the mounting area before installation.
Automatic Transmission Compatibility
This product is intended exclusively for automatic transmission vehicles.
It is not designed for manual-transmission FJ Cruisers, where the clutch pedal and associated footwell arrangement differ.
Before ordering, confirm your vehicle is equipped with an automatic transmission.
Product Specifications
Manufacturer: Orange Boxx Fabrication
Manufacturer Part Number: FJ-FOOTREST
Product Type: Heavy-Duty Dead Pedal / Driver Footrest
Vehicle Applications: Toyota FJ Cruiser / 4th Gen Toyota 4Runner
FJ Cruiser Fitment: 2007-2014
4Runner Fitment: 2003-2009
Transmission: Automatic Only
Primary Material: 14-Gauge Carbon Steel
Reinforcement: 16-Gauge Steel Tubing
Finish: Textured Matte Black Powder Coat
Surface: Non-Slip
Installation: No Drilling Required
Mounting Hardware: Included
Country of Manufacture: USA
Frequently Asked Questions
What does the Orange Boxx FJ-FOOTREST fit?
It is designed for the 2007-2014 Toyota FJ Cruiser and 2003-2009 Toyota 4Runner with automatic transmissions.
Will it fit a manual-transmission FJ Cruiser?
No. Orange Boxx specifies automatic transmissions only.
Is this a replacement for the factory dead pedal?
It is a heavy-duty aftermarket driver's footrest designed for the factory footrest mounting area. Follow the manufacturer's installation instructions regarding removal or reuse of factory components.
What is the footrest made from?
The main structure uses 14-gauge laser-cut carbon steel with 16-gauge steel tubing reinforcement.
Does installation require drilling?
No. Orange Boxx specifies a no-drill installation.
Is mounting hardware included?
Yes. The manufacturer includes mounting hardware.
What color is the footrest?
It comes in textured matte black powder coat.
Will it fit my lifted FJ Cruiser?
A suspension lift does not ordinarily change the driver's footrest mounting area. However, verify that the interior mounting area remains unmodified.
Will it fit my 4Runner?
The manufacturer identifies compatibility with the 4th Generation Toyota 4Runner. For U.S.-market vehicles, that corresponds to the 2003-2009 model years.
Is the footrest made in the USA?
Yes. Orange Boxx Fabrication identifies this product as USA-made.