Skip to content

Flowmaster Outlaw Axle-Back Exhaust – 2021-2026 Ford Bronco 2.3L/2.7L | Dual Black Chrome Tips | 818120

SKU 818120
Original price $493.95 - Original price $493.95
Original price
$493.95
$493.95 - $493.95
Current price $493.95

Give your Ford Bronco a bold, aggressive exhaust note with the Flowmaster Outlaw Axle-Back Exhaust System (Part #818120).

Designed specifically for the 2021-2026 Ford Bronco with the 2.3L EcoBoost I4 or 2.7L EcoBoost V6, this performance exhaust system delivers the unmistakable deep, aggressive sound of Flowmaster's Outlaw Series while improving exhaust flow and adding a distinctive dual-exit appearance.

Featuring 3-inch mandrel-bent 409 stainless steel tubing, an Outlaw Series performance muffler, and dual 4-inch black chrome exhaust tips, this axle-back system combines performance-oriented construction with an aggressive sound and custom styling.

Flowmaster reports maximum chassis dyno gains of 14 horsepower and 16 lb-ft of torque at the rear wheels during its testing.

The system installs using factory exhaust mounting locations and includes the necessary installation hardware.

Manufacturer Part Number: 818120

Vehicle Fitment

Ford Bronco – 2021-2026

Compatible engines:

  • 2.3L EcoBoost Turbocharged I4

  • 2.7L EcoBoost Twin-Turbocharged V6

Compatible configurations:

  • 2-Door Bronco

  • 4-Door Bronco

  • 2-Wheel Drive and 4-Wheel Drive configurations, where applicable

Important: Designed for the full-size Ford Bronco. Not intended for the Ford Bronco Sport.

This is an axle-back exhaust system, replacing the rear exhaust section rather than the entire factory exhaust system.

Key Features

  • Flowmaster Outlaw Series – Deep, aggressive performance exhaust sound

  • Direct-fit design – Engineered for the 2021-2026 Ford Bronco

  • 2.3L and 2.7L EcoBoost compatibility – Fits both available engine configurations

  • 2-door and 4-door fitment – One system accommodates both body styles

  • 3-inch mandrel-bent tubing – Designed to maximize exhaust flow

  • 16-gauge 409 stainless steel construction – Provides strength and durability

  • Outlaw performance muffler – Delivers Flowmaster's aggressive exhaust character

  • Dual 4-inch black chrome tips – Premium rear-exit appearance

  • 304 stainless steel exhaust tips – Durable construction with a distinctive finish

  • Factory-style mounting locations – Simplifies installation

  • Installation hardware and hangers included

  • Maximum dyno gains of 14 HP and 16 lb-ft reported by Flowmaster

  • Flowmaster Lifetime Limited Warranty

  • Emissions legal – Does not alter emissions-control equipment

Aggressive Flowmaster Outlaw Exhaust Sound

The Flowmaster Outlaw Series is designed for drivers who want their vehicle to sound noticeably more aggressive than stock.

The factory Ford Bronco exhaust is relatively subdued, particularly considering the performance potential of its turbocharged EcoBoost engines.

The Flowmaster 818120 Outlaw Axle-Back System replaces the rear exhaust section with an Outlaw Series performance muffler engineered to produce a deeper, more pronounced exhaust note.

What to Expect

  • Deeper exhaust tone than the factory system

  • Aggressive sound during acceleration

  • More noticeable exhaust character under throttle

  • Distinctive Flowmaster performance sound

Sound Level: Aggressive

This system is intended for Bronco owners who prefer a louder performance exhaust. Drivers looking for a quieter, factory-like sound may prefer a different Flowmaster exhaust series.

Performance-Oriented Exhaust Flow

Flowmaster designed the 818120 system to improve exhaust flow compared with the original rear exhaust configuration.

The system incorporates 3-inch mandrel-bent tubing to help maintain consistent internal pipe diameter through bends, reducing unnecessary restrictions.

Flowmaster Dyno-Tested Performance

Flowmaster reports maximum measured gains of:

  • Up to 14 horsepower at the rear wheels

  • Up to 16 lb-ft of torque at the rear wheels

These figures represent maximum gains measured during Flowmaster's testing and are not guaranteed results for every vehicle.

Actual performance gains may vary based on engine configuration, vehicle condition, modifications, and testing conditions.

Heavy-Duty 409 Stainless Steel Construction

The Flowmaster Outlaw axle-back exhaust uses 16-gauge 409 stainless steel tubing for durability and performance.

The 409 stainless steel construction provides corrosion resistance and is commonly used in performance exhaust systems.

3-Inch Mandrel-Bent Tubing

The 3-inch tubing helps maintain efficient exhaust flow while providing a durable foundation for the system.

Outlaw Series Performance Muffler

The included muffler features a black high-temperature painted finish and a performance-oriented internal design.

Its construction is engineered to produce the deep, aggressive exhaust note associated with the Flowmaster Outlaw Series.

Note: 409 stainless steel can develop surface discoloration or oxidation during normal use. This does not necessarily indicate a structural defect.

Dual 4-Inch Black Chrome Exhaust Tips

One of the most distinctive features of the Flowmaster 818120 is its dual rear-exit exhaust configuration.

The system includes two large 4-inch black chrome exhaust tips that give the Bronco a more aggressive appearance.

Exhaust Tip Details

  • Quantity: 2

  • Diameter: 4 inches

  • Material: 304 stainless steel

  • Finish: Black Chrome

  • Shape: Round

  • Cut: Angled

  • Edge: Rolled

  • Construction: Single Wall

  • Length: 5.25 inches

  • Logo: Embossed Flowmaster branding

The black chrome finish complements the Bronco's black exterior trim, aftermarket bumpers, wheels, and other off-road accessories.

Axle-Back Design

Unlike a complete cat-back exhaust system, the Flowmaster 818120 replaces the rear portion of the factory exhaust.

This allows owners to upgrade the muffler and exhaust outlet configuration without replacing the entire exhaust system.

Benefits of the axle-back configuration include:

  • Retains the upstream factory exhaust components

  • Replaces the rear muffler and outlet section

  • Provides an aggressive exhaust sound

  • Adds dual rear exhaust tips

  • Uses factory-style mounting locations

  • Requires fewer replacement components than a full cat-back system

The system does not include or replace catalytic converters.

Installation Information

The Flowmaster 818120 is engineered for direct-fit installation on compatible Ford Bronco models.

The system uses factory exhaust mounting locations and includes the necessary clamps, hangers, and installation hardware.

Installation Highlights

  • Vehicle-specific axle-back design

  • Factory-style mounting locations

  • Included exhaust clamps

  • Included hangers and mounting hardware

  • No aftermarket exhaust fabrication specified for standard installation

  • Factory upstream exhaust components retained

Follow Flowmaster's installation instructions and verify exhaust clearance around the rear bumper, suspension, and surrounding components.

Aftermarket Bumper Note: If your Bronco has an aftermarket rear bumper, confirm clearance with the dual rear-exit exhaust tips before installation.

Emissions Compliance

Flowmaster classifies part 818120 under Emissions Code 5.

According to Flowmaster, this exhaust system is legal for sale and use on emissions-controlled vehicles because it does not affect vehicle emissions or modify regulated emissions-control equipment.

The system does not include or replace catalytic converters.

What's Included

The Flowmaster 818120 package includes:

  • Flowmaster Outlaw Series performance muffler

  • 3-inch stainless steel exhaust tubing

  • Dual rear tailpipes

  • Two 4-inch black chrome exhaust tips

  • Required exhaust clamps

  • Factory-style exhaust hangers

  • Installation hardware

Not Included:

  • Catalytic converters

  • Exhaust headers

  • Turbocharger downpipes

  • Upstream exhaust replacement components

Product Specifications

Manufacturer: Flowmaster
Product Name: Outlaw Axle-Back Exhaust System
Part Number: 818120
Exhaust Series: Outlaw
Vehicle: Ford Bronco
Model Years: 2021-2026
Engines: 2.3L EcoBoost I4 / 2.7L EcoBoost V6
Body Styles: 2-Door / 4-Door
Exhaust Type: Axle-Back
Exit Configuration: Dual Rear Exit
Sound Level: Aggressive
Main Tubing Diameter: 3.00 Inches
Tubing Material: 16-Gauge 409 Stainless Steel
Muffler Material: 409 Stainless Steel
Muffler Finish: Black High-Temperature Paint
Muffler Type: Reflection
Muffler Quantity: 1
Exhaust Tip Quantity: 2
Exhaust Tip Diameter: 4.00 Inches
Exhaust Tip Length: 5.25 Inches
Exhaust Tip Material: 304 Stainless Steel
Exhaust Tip Finish: Black Chrome
Exhaust Tip Shape: Round
Exhaust Tip Cut: Angled
Exhaust Tip Edge: Rolled
Exhaust Tip Construction: Single Wall
Mounting: Factory-Style Locations
Clamps Included: Yes
Hangers Included: Yes
Catalytic Converters Included: No
Emissions Code: 5
CARB Compliant: Yes, per Flowmaster
Warranty: Lifetime Limited
UPC: 090127140277

Frequently Asked Questions

Will the Flowmaster 818120 fit my Ford Bronco?

Yes. It is designed for the 2021-2026 full-size Ford Bronco equipped with either the 2.3L EcoBoost or 2.7L EcoBoost engine.

Does it fit both 2-door and 4-door Broncos?

Yes. Flowmaster confirms compatibility with both body styles.

Will it fit the Ford Bronco Sport?

No. This system is designed for the full-size Ford Bronco, not the Bronco Sport.

Will it fit the 2.7L EcoBoost V6?

Yes. The 818120 is compatible with the 2.7L EcoBoost V6 as well as the 2.3L EcoBoost I4.

How loud is the Flowmaster Outlaw exhaust?

Flowmaster rates the Outlaw Series as Aggressive. It is intended for owners seeking a louder, deeper exhaust note than the factory system.

Is this a cat-back or axle-back exhaust?

This is an axle-back exhaust system. It replaces the rear exhaust section while retaining the upstream factory exhaust components.

What size exhaust tubing does it use?

The system uses 3-inch mandrel-bent 409 stainless steel tubing.

What size are the exhaust tips?

The system includes two 4-inch black chrome exhaust tips manufactured from 304 stainless steel.

Does the Flowmaster 818120 increase horsepower?

Flowmaster reports maximum dyno gains of 14 horsepower and 16 lb-ft of torque at the rear wheels. Actual results vary.

Does the system include installation hardware?

Yes. The necessary clamps, hangers, and mounting hardware are included.

Will this exhaust work with an aftermarket rear bumper?

Compatibility depends on the bumper's design. Check clearance around the dual rear-exit exhaust tips before ordering.

Is the Flowmaster 818120 emissions legal?

Flowmaster lists this system as Emissions Code 5 and CARB compliant because it does not alter emissions-control equipment.

What warranty does Flowmaster provide?

The system is backed by Flowmaster's Lifetime Limited Warranty, subject to the manufacturer's warranty terms.

Give Your Bronco the Sound It Deserves

The Flowmaster Outlaw Axle-Back Exhaust System (818120) delivers aggressive performance sound, durable stainless steel construction, and distinctive dual black chrome exhaust tips for the 2021-2026 Ford Bronco.

With direct-fit installation, compatibility with both EcoBoost engines, and Flowmaster's Lifetime Limited Warranty, it's an excellent upgrade for Bronco owners who want more sound and a bold rear-exit exhaust appearance.

Warning:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov