Addictive Desert Designs Stealth Fighter Front Skid Plate – 2021-2026 Ford Bronco | AC23007NA03

Protect the front underbody of your Bronco with the Addictive Desert Designs Stealth Fighter Front Skid Plate, part #AC23007NA03.

Designed specifically to complement the ADD Stealth Fighter Front Bumper, this heavy-duty skid plate replaces the Bronco's factory plastic front skid with a much stronger 3/16-inch aluminum alloy plate.

The aluminum construction provides substantially greater protection against rocks, trail obstacles and debris while keeping weight lower than a comparable heavy-gauge steel skid plate.

Designed specifically for the 2021-2026 Ford Bronco, the Stealth Fighter skid plate features a direct bolt-on installation and is manufactured in the USA.

Vehicle Fitment

Ford Bronco

• 2021

• 2022

• 2023

• 2024

• 2025

• 2026

Designed For:

• ADD Stealth Fighter Front Bumper

• ADD bumper part #F230142210103

Skid Plate Part Number: AC23007NA03

IMPORTANT: This listing is for the front skid plate only. The ADD Stealth Fighter Front Bumper is sold separately.

Key Features

• Genuine Addictive Desert Designs

• Part number AC23007NA03

• Fits 2021-2026 Ford Bronco

• Designed for use with the ADD Stealth Fighter Front Bumper

• Replaces the factory plastic front skid plate

• High-grade 3/16" aluminum alloy

• Provides increased protection for the Bronco's front underbody

• Stronger and more impact-resistant than the factory plastic skid

• Aluminum construction provides strength without unnecessary steel weight

• Corrosion-resistant aluminum construction

• Durable black powder-coated finish

• Direct bolt-on installation

• No welding required

• Approximately 30-minute installation

• Made in the USA

• ADD Stealth Fighter bumper sold separately

Designed for the ADD Stealth Fighter Front Bumper

The AC23007NA03 was designed specifically as the upgraded front skid plate for the ADD Stealth Fighter Front Bumper.

Compatible ADD Front Bumper:

Stealth Fighter Front Bumper – F230142210103

The Stealth Fighter bumper can be installed while retaining the Bronco's factory skid plate with trimming, but AC23007NA03 provides the purpose-built ADD solution for customers wanting significantly stronger front underbody protection.

The combination creates an integrated bumper and skid-plate system designed specifically around the 6th-generation Ford Bronco.

Replaces the Factory Plastic Skid Plate

The factory Bronco configuration uses a plastic skid plate in this location.

For normal street driving, plastic provides basic coverage. When the Bronco is taken off-road, however, rocks, ledges, branches and trail debris can place significantly greater loads on the underbody.

The ADD Stealth Fighter skid plate replaces that plastic component with:

3/16-Inch Aluminum Alloy

This creates a much more substantial barrier between trail obstacles and vulnerable components underneath the front of the Bronco.

3/16-Inch Aluminum Alloy Construction

ADD manufactures the AC23007NA03 from high-grade 3/16-inch aluminum alloy.

Aluminum is particularly well suited for skid-plate construction because it combines:

• High strength

• Impact resistance

• Corrosion resistance

• Reduced weight compared with similarly sized steel armor

The result is meaningful front underbody protection without adding unnecessary weight to the front of the Bronco.

Front Underbody Protection

The Stealth Fighter skid plate is designed to protect the vulnerable front underbelly of the Bronco from common off-road hazards.

It provides additional protection when encountering:

• Rocks

• Ledges

• Ruts

• Trail debris

• Loose stone

• Branches

• Uneven terrain

• Steep approach transitions

This makes it an excellent companion upgrade for Broncos equipped with the Stealth Fighter bumper and used for trail driving, overlanding or general off-road recreation.

Purpose-Built Fit

Unlike a universal skid plate, the AC23007NA03 is engineered specifically for the Ford Bronco and ADD Stealth Fighter bumper system.

The skid follows the shape and mounting requirements of the Stealth Fighter front-end configuration for a clean, integrated appearance.

This helps maintain the low-profile styling of the Stealth Fighter bumper while extending protection underneath the vehicle.

Bolt-On Installation

The ADD Stealth Fighter Front Skid Plate is designed as a:

Fully Bolt-On Installation

No welding is required.

The skid replaces the factory plastic skid plate and mounts beneath the Stealth Fighter bumper using its intended mounting locations.

Installation is straightforward for customers already installing or running the ADD Stealth Fighter Front Bumper.

Installation Position

The AC23007NA03 installs in place of the factory plastic front skid plate, underneath and behind the lower portion of the Stealth Fighter bumper.

It is an underbody protection component rather than an overlay that simply mounts on top of the factory plastic skid.

The factory plastic skid is removed when installing the AC23007NA03.

Stealth Fighter Bumper Factory Skid Option

The ADD Stealth Fighter Front Bumper itself can be installed while retaining the Bronco's factory skid plate, although ADD notes that the factory skid requires trimming.

Customers therefore have two basic configurations:

Stealth Fighter Bumper + Modified Factory Skid

• Retains the original plastic skid plate

• Factory skid requires trimming

Stealth Fighter Bumper + AC23007NA03

• Replaces the factory plastic skid

• Upgrades protection to 3/16-inch aluminum alloy

• Purpose-built for the Stealth Fighter bumper

• Provides a cleaner integrated aftermarket solution

For Broncos that will see regular off-road use, the AC23007NA03 provides the more substantial underbody protection option.

Lightweight Aluminum Protection

Heavy-duty protection does not necessarily require a heavy steel skid plate.

Using 3/16-inch aluminum alloy allows ADD to provide substantial protection while limiting unnecessary weight at the front of the Bronco.

This is particularly beneficial on Broncos already equipped with accessories such as:

• Auxiliary lights

• Recovery equipment

• Suspension upgrades

• Larger tires

Reducing unnecessary front-end weight helps avoid adding more load than necessary to the front suspension.

Corrosion Resistance

Aluminum naturally provides excellent resistance to corrosion, making it particularly suitable for an underbody component regularly exposed to:

• Water

• Mud

• Road spray

• Snow

• Dirt

• Sand

• Trail debris

The exterior finish provides additional protection while matching the appearance of the ADD Stealth Fighter bumper system.

Made in America

The Stealth Fighter Front Skid Plate is:

Made in the USA

ADD designs and manufactures its off-road products at its facility in Chandler, Arizona.

What's Included

The Addictive Desert Designs AC23007NA03 Stealth Fighter Front Skid Plate includes:

• (1) Stealth Fighter Front Skid Plate

• Required skid-plate installation hardware

NOT INCLUDED:

• Stealth Fighter Front Bumper
  

• Auxiliary lighting

• Adaptive Cruise Control relocation bracket

• Other bumper accessories

Product Specifications

Manufacturer: Addictive Desert Designs (ADD)
Part Number: AC23007NA03
Product: Stealth Fighter Front Skid Plate
Vehicle: Ford Bronco
Model Years: 2021-2026
Installation Location: Front Underbody
Compatible Bumper: ADD Stealth Fighter Front Bumper
Compatible Bumper Part Number: F230142210103
Material: High-Grade Aluminum Alloy
Material Thickness: 3/16"
Color: Black
Installation: Fully Bolt-On
Factory Plastic Skid: Replaced
Welding Required: No
Approximate Installation Time: 30 Minutes
Made in USA: Yes
UPC / GTIN: 814849026943

Frequently Asked Questions

What Broncos does ADD AC23007NA03 fit?
ADD currently lists the Stealth Fighter Front Skid Plate for the 2021-2026 Ford Bronco.

Why does the old ADD URL say 2021-2022?
The URL reflects ADD's original product naming, but ADD's current product page lists the application as 2021-2026 Ford Bronco.

What bumper is AC23007NA03 designed for?
It is designed specifically to complement the ADD Stealth Fighter Front Bumper, part #F230142210103.

Does the Stealth Fighter bumper come with this skid plate?
No. The AC23007NA03 skid plate is an optional component and is sold separately from the Stealth Fighter Front Bumper.

Can I use the factory skid plate with the Stealth Fighter bumper instead?
Yes. ADD states that the factory skid plate can be retained with the Stealth Fighter bumper, but trimming is required.

Does AC23007NA03 replace the factory plastic skid plate?
Yes. ADD specifically designed this skid plate to replace the stock plastic OEM skid plate.

Does this skid plate install over the factory plastic skid?
No. The AC23007NA03 is a replacement for the factory plastic skid rather than an additional plate installed over it.

How thick is the ADD skid plate?
It is constructed from 3/16-inch aluminum alloy.

Is the skid plate steel or aluminum?
It is manufactured from high-grade aluminum alloy, providing strong protection with less weight than a comparable steel plate.

Is AC23007NA03 a complete Bronco skid-plate system?
No. This is specifically the front skid plate associated with the ADD Stealth Fighter Front Bumper. It should not be confused with a complete transmission, transfer-case, fuel-tank or full-underbody skid system.

Does installation require welding?
No. ADD describes the AC23007NA03 as fully bolt-on.

How long does installation take?
Installation is approximately 30 minutes, although actual time can vary depending on vehicle configuration and whether the Stealth Fighter bumper is being installed at the same time.

Is the Stealth Fighter bumper included?
No. This listing is for the AC23007NA03 skid plate only. The Stealth Fighter Front Bumper is sold separately.

Is this skid plate made in the USA?
Yes. ADD specifies that the Stealth Fighter Front Skid Plate is Made in America.