EBC GD Series Front Slotted & Dimpled Brake Rotors – Toyota 4Runner, FJ Cruiser & Tacoma | GD7237

EBC GD Series Front Slotted & Dimpled Brake Rotors – Toyota 4Runner, FJ Cruiser & Tacoma | GD7237

Upgrade your Toyota's braking system with the EBC GD Series Sport Front Brake Rotors, part #GD7237.

Designed for drivers looking for improved braking performance from their truck or SUV, EBC's GD Series combines a slotted and dimpled rotor surface with quality cast-iron construction and a corrosion-resistant finish.

Unlike conventional cross-drilled rotors, the dimples in EBC GD Series rotors do not pass completely through the rotor. This design provides many of the performance benefits associated with drilled and slotted rotors while avoiding the stress concentrations that can occur around fully drilled holes.

GD7237 is supplied as a matched pair of front brake rotors for compatible Toyota applications.

Vehicle Fitment

Toyota 4Runner

• 2003-2009

• Front

Toyota FJ Cruiser

• 2007-2014

• Front

Toyota Tacoma

• Compatible 2005-2023 applications

• Front

Important: Toyota used different front brake configurations across certain models, trim levels, and years. Always verify the vehicle's original rotor dimensions or application data before ordering.

Key Features

• EBC GD Series Sport Rotors

• Front axle application

• Supplied as a pair – left and right front rotors

• Slotted and dimpled friction surface

• Dimples are not drilled completely through the rotor

• Designed for improved braking performance

• Slots help evacuate gases, debris, and contaminants from the pad surface

• Suitable for trucks, SUVs, daily drivers, towing, and performance-oriented applications

• Corrosion-resistant protective finish

• Precision machined and inspected by EBC

• Direct replacement for compatible factory-size front brake rotors

• Excellent upgrade when paired with EBC performance brake pads

Slotted & Dimpled GD Series Design

The EBC GD Series uses a combination of slots and blind-drilled dimples across the braking surface.

The slots help maintain a clean pad surface while allowing heat, gases, water, and debris to escape from between the brake pad and rotor.

The dimples provide additional surface features without drilling completely through the rotor.

This is an important distinction between the EBC GD Series and traditional cross-drilled rotors.

GD7237 is dimpled and slotted – not drilled-through and slotted.

Built for Trucks & SUVs

The GD Series is well suited for Toyota trucks and SUVs that see more demanding use than a typical passenger vehicle.

GD7237 can be an excellent choice for vehicles used for:

• Daily driving

• Off-road use

• Overlanding

• Towing

• Larger wheels and tires

• Mountain driving

• Repeated braking

• Performance-oriented street use

For modified Toyota trucks carrying additional weight from bumpers, winches, skid plates, roof racks, camping equipment, or larger tires, maintaining the braking system becomes especially important.

Corrosion-Resistant Finish

EBC GD Series rotors feature a corrosion-resistant protective finish designed to help reduce rust on areas of the rotor not continuously contacted by the brake pads.

During initial use, the brake pads naturally remove the coating from the swept friction surface while the coating remains on non-contact areas to provide continued corrosion protection.

Do not attempt to remove the protective coating from the braking surface before installation.

Pair With EBC Performance Brake Pads

For a complete braking upgrade, GD7237 rotors can be combined with an appropriate EBC brake pad compound.

Depending on how the vehicle is used, EBC offers pad compounds designed for everything from normal street driving to heavier truck/SUV and performance applications.

Always select brake pads specifically listed for your vehicle and intended use.

Installation Notes

Before installation:

• Verify GD7237 is correct for your specific vehicle and brake configuration.

• Inspect the brake calipers for sticking or seized pistons.

• Inspect caliper slide pins and hardware.

• Replace worn or damaged brake hardware as necessary.

• Follow EBC's recommended bedding procedure after installation.

• Do not remove the factory-applied corrosion-resistant coating from the rotor.

For best braking performance, rotors and pads should be properly bedded after installation.

Product Specifications

Manufacturer: EBC Brakes
Product Line: GD Series Sport Rotors
Part Number: GD7237
Product Type: Performance Brake Rotor Set
Position: Front
Quantity: 2 Rotors – Left & Right
Rotor Design: Slotted & Dimpled
Rotor Type: Vented
Nominal Rotor Diameter: Approximately 12.6 Inches
Construction: Cast Iron
Finish: Corrosion-Resistant Protective Coating
Application: Street / Truck / SUV / Performance

Frequently Asked Questions

Does EBC GD7237 fit the Toyota FJ Cruiser?
Yes. GD7237 is listed as a front brake rotor application for the 2007-2014 Toyota FJ Cruiser.

Does GD7237 fit the Toyota 4Runner?
GD7237 is listed for compatible Toyota 4Runner applications, including 2003-2009 models. Because Toyota offered different brake configurations, verify your specific application before ordering.

Does GD7237 fit the Toyota Tacoma?
GD7237 is used on compatible Tacoma applications. Brake configurations can vary by year and model, so the vehicle application should be verified before ordering.

Are GD7237 rotors sold individually?
No. GD7237 is supplied as a front rotor pair, providing both front brake rotors.

Are these rotors drilled and slotted?
They are dimpled and slotted. The dimples do not pass completely through the rotor like conventional cross-drilled holes.

Why does EBC use dimples instead of drilling completely through the rotor?
The blind dimples provide additional surface features without creating through-holes in the rotor friction surface.

Are these front or rear rotors?
GD7237 is a front brake rotor set for the applications listed.

What size are GD7237 rotors?
The nominal rotor diameter is approximately 12.6 inches. Always verify rotor dimensions and vehicle application before ordering.

Can I use these with EBC performance brake pads?
Yes. GD Series rotors can be paired with the appropriate EBC performance pad compound for your vehicle and intended use.

Do I need to remove the protective coating before installation?
No. Do not remove the factory-applied protective coating. The brake pads will naturally remove it from the swept braking surface during the initial bedding process.